Views:

The haptic device drivers for the currently shipping versions of haptic devices to be used with Geomagic Sculpt software are available below for download. Select the appropriate file from the table and then follow these steps:

  1. Remove the previously installed haptic device driver from Control Panel, if any.

  2. ​Download the .exe file to your computer.

  3. Run the .exe file as administrator

Note: Only one driver can be installed on a computer.

Geomagic Touch Device Driver (GTDD) installation guide



for USB Touch or Touch 3D Stylus (Interface:   )
OS: 7(64-bit)

Geomagic Sculpt

v2019

Touch Device Driver v2018.10.22:

for Ethernet Geomagic Touch, Touch X, USB Touch or Touch X devices (Interface:   )

OS: 7/8/10 (64-bit)

 

v2017

Touch Device Driver v2017.11.30:

for Ethernet Geomagic Touch devices (Interface:  )
OS: 7/8/10 (64-bit)

for USB Touch or Touch 3D Stylus (Interface:  )
OS: 7 (64-bit)

 
Geomagic Touch Device Driver v2016.10.13:

for Ethernet Geomagic Touch devices (Interface:  )
OS: 7/8/10 (64-bit)

for USB Touch 3D Stylus (Interface:  )
OS: 7 (64-bit)

 

v2016

Geomagic Touch Device Driver v2016.10.13:

for Ethernet Geomagic Touch devices (Interface:  )
OS: 7/8/10 (64-bit)

for USB Touch 3D Stylus (Interface:  )
OS: 7 (64-bit)

 

v2015

Geomagic Touch Device Driver v2016.1.1:

for Ethernet Geomagic Touch devices (Interface:  )
OS: 7/8 (32-bit & 64-bit)

for USB Touch 3D Stylus (Interface:  )
OS: 7 (32-bit & 64-bit)

 

v2014.3

Geomagic Touch Device Driver v2014.20:

for Ethernet Geomagic Touch devices (Interface:  )
OS: 7/8 (32-bit & 64-bit)

for USB Touch 3D Stylus (Interface:  )
OS: 7 (32-bit & 64-bit)