Views:

The haptic device drivers for the currently shipping versions of haptic devices to be used with OpenHaptics and Geomagic modeling software are available below for download. Select the appropriate file from the tables below and then follow these steps:

  1. Remove the previously installed Phantom Device Driver or Geomagic Touch Device Driver from Control Panel, if any.
  2. ​Download the .exe or .zip file to your computer.
  3. (for .zip files) Unzip the file.
  4. Run .exe file.

Note:
1. Only one driver can be installed on a computer.

2. All of the listed Windows based Phantom Device Drivers (PDD) support all parallel port & FireWire interface-based PHANTOM devices. Geomagic Touch Device Drivers (GTDD) support Ethernet & USB interface-based Touch devices.

Phantom Device Driver (PDD) installation guide

Geomagic Touch Device Driver (GTDD) installation guide


Geomagic Sculpt

v2017

Touch Device Driver v2017.11.30:

for Ethernet Geomagic Touch devices, USB Touch 3D Stylus or (new) USB 3D Systems Touch (Interface:   )

OS: 7/8/10 (64-bit)

 

Geomagic Touch Device Driver v2016.10.13:

for Ethernet Geomagic Touch devices or USB Touch 3D Stylus (Interface:   )

OS: 7/8/10 (64-bit)


 

v2016

Geomagic Touch Device Driver v2016.10.13:

for Ethernet Geomagic Touch devices or USB Touch 3D Stylus (Interface:   )

OS: 7/8/10 (64-bit)


 

v2015

Geomagic Touch Device Driver v2016.1.1:

for Ethernet Geomagic Touch devices or USB Touch 3D Stylus (Interface:   )

OS: 7/8 (32-bit & 64-bit)


 

v2014.3

Geomagic Touch Device Driver v2014.20:

for Ethernet Geomagic Touch devices or USB Touch 3D Stylus (Interface:   )

OS: 7/8 (32-bit & 64-bit)

 
 

Geomagic Freeform & Geomagic Freeform Plus

v2017 Touch Device Driver v2017.11.30:

for Ethernet Geomagic Touch devices, USB Touch 3D Stylus or (new) USB 3D Systems Touch (Interface:   )

OS: 7/8/10 (64-bit)

 
Geomagic Touch Device Driver v2016.10.13:

for Ethernet Geomagic Touch devices or USB Touch 3D Stylus (Interface:   )

OS: 7/8/10 (64-bit)

 
Phantom Device Driver v5.1.9:

for Firewire or Parallel devices (Interface:   )

OS: 7/8/10 (64-bit) See important note for firewire devices*
v2016 Geomagic Touch Device Driver v2016.10.13:

for Ethernet Geomagic Touch devices or USB Touch 3D Stylus (Interface:   )

OS: 7/8/10 (64-bit)

 
Phantom Device Driver v5.1.9:

for Firewire or Parallel devices (Interface:   )

OS: 7/8/10 (64-bit) See important note for firewire devices*
v2015 Geomagic Touch Device Driver v2014.20:

for Ethernet Geomagic Touch devices or USB Touch 3D Stylus (Interface:   )

OS: 7/8 (32 bit & 64-bit)

 
Phantom Device Driver v5.1.9:

for Firewire or Parallel devices (Interface:   )

OS: XP/7 (32-bit) and XP/7/8 (64-bit) See important note for firewire devices*
v2014 Geomagic Touch Device Driver v2014.2:

for Ethernet Geomagic Touch devices only (Interface: )

OS: XP/7 (32-bit) and XP/7/8 (64-bit)
Phantom Device Driver v5.1.9:

for Firewire or Parallel devices (Interface:   )
OS: XP/7 (32-bit) and XP/7/8 (64-bit) See important note for firewire devices*
v2013 & v12 Phantom Device Driver v5.1.7:

for Firewire or Parallel devices (Interface:   )
OS: XP/Vista/7 (32 bit & 64 bit)
v10 & v11 Phantom Device Driver v4.2.131:

for Firewire or Parallel devices (Interface:   )
OS: XP/Vista/7 (32 bit & 64 bit)


 

Geomagic Claytools

v2014 Geomagic Touch Device Driver v2014.2:

for Ethernet Geomagic Touch devices only (Interface: )

OS: XP/7 (32-bit) and XP/7/8 (64-bit)
Phantom Device Driver v5.1.9:

for Firewire or Parallel devices (Interface:   )
OS: XP/7 (32-bit) and XP/7/8 (64-bit) See important note for firewire devices*
v2013 & v4 Phantom Device Driver v5.1.7

for Firewire or Parallel devices (Interface:   )
OS: XP/Vista/7 (32 bit & 64 bit)
v2 & v3 Phantom Device Driver v4.2.131

for Firewire or Parallel devices (Interface:   )
OS: XP/Vista/7 (32 bit & 64 bit)


 

 

OpenHaptics

v3.4 Touch Device Driver v2017.11.30:

for Ethernet Geomagic Touch devices, USB Touch 3D Stylus or (new) USB 3D Systems Touch (Interface:   )

OS: 7/8/10 (64-bit)

 
Geomagic Touch Device Driver v2016.10.13:

for Ethernet Geomagic Touch devices or USB Touch 3D Stylus (Interface:   )
OS: 7/8 (64-bit)

 
Phantom Device Driver v5.1.7

for Firewire or Parallel devices (Interface:   )

OS: XP/Vista/7 (32 bit & 64 bit)
v3.2.2 Geomagic Touch Device Driver v2014.2:

for Ethernet Geomagic Touch devices only (Interface: )

OS: XP/7 (32-bit) and XP/7/8 (64-bit)
Phantom Device Driver v5.1.7

for Firewire or Parallel devices (Interface:   )

OS: XP/Vista/7 (32 bit & 64 bit)
v3.0 Phantom Device Driver v4.2.131:

for Firewire or Parallel devices (Interface:   )

OS: XP/Vista/7 (32 bit & 64 bit)
Linux driver is included in the OpenHaptics for Linux package


 


Important Note:

IEEE-1394a compatible Firewire interface is supported for Win 7. However, Win 8 and 10 support is not guaranteed. Microsoft has dropped support for the components in the 1394 drivers which enable legacy mode, something that is often required to assure a particular card functions properly with Omni or PCC converters for parallel port devices.